Clover CDR 4170 Manuál s instrukcemi

INSTRUCTION MANUAL STANDALONE 4CH DVR DIGITAL VIDEO RECORDER MODEL: CDR 4170 POWERFULLALARMTIMERPLAYRECCH1 CH2 CH4CH3POP PIPQUADE

3. OPERATION 3.1 FRONT PANEL 1. HDD RACK Master HDD: Installed 160GB 2. CH 1 / LEFT - While in Quad mode, press this button momentar

4. CH 3 /DOWN - While in Quad mode, press this button momentarily (at least 3 seconds) and channel 3 will appear in full screen. - In full screen mod

10. LED FUNCTION - REC : The LED will blink when the system is in the recording mode.- PLAY : The LED will blink when the system is in the

WATERMARK CHECK - Press and hold this button for about 3 seconds in the playback mode, the Water Mark OSD will be shown on the screen. To exit, pres

3.2 BACK PANEL 1 2 3 45 6 7 8 CH1 CH2 CH3 CH4LOOP OUTVIDEO INV - OUT1 A - INA - OUTETHERNETALARM IN1234GND+_ALARM OUTAC INPUTAC100-240

4. BASIC CONFIGURATION OF THE MONITOR SCREEN 4.1 START UP When the system starts up, the following pictures will be displayed in sequence.

4.2 LIVE SCREEN Camera Title Time and DateFull Screen in Live Mode Quad Screen in Live Mode Camera Title Indicat

Indicates recording HDD Time and Date Camera Title POP Screen in Live Mode 4.3 RECORDING SCREEN Recording OSD Camera Title I

4.4 PLAYBACK SCREEN Playback OSD & Speed Time and Date Camera Title Indicates recording HDD Playback OSD &a

4.5 RECORD AND PLAYBACK SCREEN REC, Playback OSD & Speed Time and Date Camera Title Indicates recording HDD

CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER

4.6 LIVE Live means viewing the present video images from the cameras on the monitor. 4.6.1 Full Screen display Full screen display is possible in

- Press the same channel selection button to release the freeze function. Freeze symbol 4.6.7 OSD On / Off Available in the LIVE, RECORD

The whole recording lists are updated hourly up to 1,000 lists on both Master and Slave. 4.7.3 Schedule recording Recording by scheduled time The tim

4.8.3 Playback by the last recording list When the SEARCH button is pressed, the SEARCH/HDD SET menu appears on the screen. Select THE LAST RECORD LIS

Set the TIME/DATE by using the UP/DOWN buttons for changing the values and use the LEFT/RIGHT buttons to move to next field. Press the ENTER button

5. SETUP 5.1 SETUP SCREEN TREE - 20 -

- 21 -

- 22 -

5.2 HOW TO SET UP - Setup is possible in the LIVE mode and partly in the recording mode, not in the playback mode. - Press the SETUP button. - Choos

5.3.6 REC SPEED • Choose the REC SPEED in the ALARM OPTION menu by using the UP/DOWN buttons. • Choose one REC SPEED among 01, 02, 03, 05, 10, 15, 30

NOTE : This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide re

5.4.4 AREA • Choose the AREA in the MOTION menu with the UP/DOWN buttons • Press the ENTER button to create the motion detection AREA. • Move the sym

• To apply the setting, press the ENTER button. 5.5.1.3 DATE FORMAT • Choose the DATE FORMAT in the TIME /DATE SET menu with the UP/DOWN buttons. •

by using the LEFT/RIGHT/ENTER button, it starts to formatting or select NO for going back to the previous mode. 5.5.2.3 HDD INFO • Choose the HDD IN

5.5.6.1 IP MODE • Choose the IP MODE in the IP CONFIGURATION menu with the UP/DOWN buttons. • Choose DYNAMIC IP or STATIC IP by pressing the ENTER but

5.5.6.6 MAC ID The MAC ADDRESS was consigned to each DVR at the factory. 5.5.7 NETWORK PERFORMANCE • Choose the NETWORK PERFORMANCE in the

5.6.2 DWELL TIME • Choose the DWELL TIME in the VIDEO menu with the UP/DOWN buttons. • Press the ENTER button, and the DWELL TIME menu will be display

5.7.5 AUDIO REC • Choose the AUDIO REC in the RECORD menu by using UP/DOWN buttons. • Select ON or OFF by pressing the ENTER button. 5.7.6 SCHEDULE

At “ON” mode, the borderline will be shown on the screen. 5.8.3 TIME/DATE • Choose the TIME/DATE in the DISPLAY menu by using UP/DOWN buttons. • Sele

5.10.1.1 PASSWORD • Select the PASSWORD in the DVR ACCOUNT menu by using UP/DOWN buttons. • Select ON or OFF by using the ENTER button. • If ON is s

• Press the ENTER button and the NETWORK ACCOUNT menu will be displayed. 5.10.2.1 USER ID • Select the USER ID in the NETWORK ACCOUNT menu by using U

CONTENTS 1. GENERAL PRECAUTIONS 1 2. SPECIFICATIONS 3 3. OPERATION 5 3.1 FRONT PANEL

5.11.2 HOST NAME • Choose the HOST NAME in the DDNS SET menu with the UP/DOWN buttons. • Press the ENTER button to change the values with the UP/DOWN

10. To complete, click Add Host on the bottom. 11. After registration, go to the DDNS SET menu on the DVR. 12. Refer to section 5.11 DDNS in this m

4. Attach the HDD to the removable HDD rack and secure it with the supplied screws as below. 5. Assemble and put the removable HDD rack back in

HDD2 ATTACHING POINT 4. Secure the HDD with the supplied screws as below. 5. Connect the power connector and the flat cable to the HD

7. PTZ CONTROL 1. Connect Pan/Tilt/Zoom camera’s control to RS485(+) / RS485(-) port on the rear of the system. 2. The video output of Pan/Tilt/Zoom

8. INSTALLATION 8.1 System Configuration Diagram The following illustration is showing the fully installed system.

8.2 CAMERA This product can be installed up to 4 cameras. Connect cameras to the VIDEO IN (BNC) on the back panel of the product. To connect a PTZ cam

CH1 CH2 CH3 CH4LOOP OUTVIDEO INV - OUT1 A - INA - OUTETHERNETALARM IN1234GND+_ALARM OUTAC INPUTAC100-240V,50/60Hz POWERATTENTIONCAUTIONRISQUE DE CHO

TIME LAPS VCR CH1 CH2 CH3 CH4LOOP OUTVIDEO INV - OUT1 A - INA - OUTETHERNETALARM IN1234GND+_ALARM OUTAC INPUTAC100-240V,50/60Hz POWERATTENTIONCAUTIO

How to install the client program (CLDVR) 1. Start the operating system (Windows 98/2000/XP). 2. Insert the program CD into CD-ROM drive. 3. Open My

8. INSTALLATION 40 8.1 SYSTEM CONFIGURATION DIAGRAM 40 8.2 CAMERA 41 8.3 AUDIO

The following CONFIG screen will be shown. • Enter the IP/URL, Port number (default: 5700) and ID (default: admin), which must be the same as

1 2342clover.cloverdvr.com 1. CONNECTION STATUS INDICATOR It indicates that is currently being connected IP address and bandwidth (tra

1. F/W (FIRMWARE) The FIRMWARE can be upgraded by pressing the F/W button or USB device. This button is not for users, only for manufacturers and

admin 4 132 1. Select the HDD (Master or Slave) 2. Select 1 out of the lists for setting up the Backup Start Time. 3. Setup the B

Select Channel Reset button 7. PRINT • Click the PRINT button to print the current pictures shown on the GUI and then the following win

10. QUAD BUTTON • Click the Quad button to display the quadrant pictures. 11. AUTO BUTTON • The GUI will be viewed a full screen at a time in a con

on the window and press the Update REC.Quality button to save them. • Installed HDD and Recording HDD: Shows currently installed HDD information su

1. Select HDD (Master/Slave) you wish to search. 2. Choose one of recording lists, which are updated hourly up to 1,000 lists on both Master

16. REW • Press this button to rewind the recorded images. • The speed will be increased up to x16 speed when you keep clicking this button

9.5.2 PTZ CONTROL The following picture enables you to control PTZ camera connected to the system. ZOOM controlPAN controlFOCUS control T

1. GENERAL PRECAUTIONS 1. Read Instructions: All of the safety and operating instructions should be read and understood before the product is used.

3. Click in the box of WATER MARK to put WATER MARK while replaying (See section 9.5.1 #14 setup for more details). 4. Select TV system between NTSC a

APPENDIX 1. RECORDING TIME TABLE (DAYS) 1.1 REC RESOLUTION (720H) / REC QUALITY (VERY HIGH) SPEED 40G HDD 80G HDD 120G HDD 200G HDD 01 IPS 15-D

30 IPS 1-Days 00-Hours 2-Days 00-Hours 2-Days 22-Hours 4-Days 22-Hours60 IPS 12-Hours 1-Days 00-Hours 1-Days 12-Hours 2-Days 12-Hours 1.5 REC RE

10 IPS 4-Days 17-Hours 9-Days 09-Hours 14-Days 02-Hours 23-Days 09-Hours15 IPS 3-Days 02-Hours 6-Days 07-Hours 9-Days 09-Hours 15-Days 14-Hours

[1-2] TIME : Time does not get initialization. [1-3] DATE FORM : MM/DD/YYYY [1-4] DATE : Date does not get initialization. [2] HARD DISK

[6-1] SCHEDULE REC : OFF [6-2] SCHEDULE REC SETTING : No setup data 6] DISPLAY [1] TITLE DISPLAY : ON [2] BORDER LINE : ON [3] TIME / D

- Check the brightness and contrast level of the monitor. 4. CHANNEL IS IN BLACK & WHITE MODE - Check the cameras. RECORDING RELATED PRO

Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state

result in damage and will often require extensive work by a qualified service technician to restore the product to its normal operation e. If the pro

2. SPECIFICATIONS DVR SPECIFICATIONSSystem NTSC or PAL (Auto Detection) Video Input 4 Inputs (BNC): 1Vp-p composite, 75ohms Video Output 2 Outp

Backup JPEG & AVI File format through GUI, DVR File format at USB. Ethernet RJ-45 Connector for network communication PAN / TILT RS-485 Control